[cisco-voip] device name of gk controlled trunk

[Wes Sisk]

This forces CM to register one device with the signaling port of 1720.
Other devices register with different signaling ports.  Apparently there are
a few h323 stacks out there that do not like signaling ports other than
1720.

/Wes
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Boda György
Sent: Friday, July 29, 2005 11:49 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] device name of gk controlled trunk


Hi,
What does the following CCM service parameter do: Device Name of GK
Controlled Trunk that will use Port 1720 :
CCM always registers with the name of the H.323 trunk at the GK and the
above command has no effect at all. What is the use of it?
Thanks.
Gyorgy Boda