[cisco-voip] 7200 NON VXR + PA-VXC-T1

[Dave Temkin]

I had pretty good luck with the 2800's with the onboard DSP's and VWIC 
cards... Also added a few NM-HDV2-2T1/E1's and those worked well also. 

On Tue, 7 Jun 2005 10:37:33 -0300, Diego Costa wrote
> Excellent Thanks to all. I have another question, Did you recommend 
> a c2800 with an HDV?.
> 
> Regards,
> Diego.
> 
> -----Mensaje original-----
> De: Dave Temkin [mailto:dave at ordinaryworld.com] 
> Enviado el: Lunes, 06 de Junio de 2005 12:41 a.m.
> Para: Walenta, Phil
> CC: Diego Costa; Cisco-Voip
> Asunto: RE: [cisco-voip] 7200 NON VXR + PA-VXC-T1
> 
> Completely agreed.  One of my favorite, still unsolved bugs, is 
> where 7200 DSP resources get completely locked up on PA-VXB and PA-
> VXC cards and only a reload will unlock them - and sometimes it 
> actually takes a power cycle vs. just a warm reload to actually fix it.
> 
> Happens in various releases of 12.2, 12.3, and 12.3T code.  UGLY.  
> And that's far from the only issue I've seen.
> 
> On Sun, 5 Jun 2005, Walenta, Phil wrote:
> 
> > I'd recommend against using a 7200 as a voice gateway.  I've had several
> > interesting experiences with them, none that I'd call good.
> >
> > ________________________________
> >
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Diego Costa
> > Sent: Friday, June 03, 2005 2:12 PM
> > To: Cisco-Voip
> > Subject: [cisco-voip] 7200 NON VXR + PA-VXC-T1
> >
> >
> >
> > Hi List!
> >
> >
> >
> > I have a question, anyone are using or used a Cisco 7200 NON VXR with a
> > PA-VXC-T1??? We are thinking to use it, but we didn't find information
> > about the experience with this equipment.
> >
> >
> >
> > Regards,
> >
> > Diego.
> >
> >


David Temkin