[cisco-voip] Private Calls

[Wes Sisk]

numbering plan should be different from presentation indicator.  Sounds like
you have presentation indicator set to private on the gateway config page.

/Wes
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Ortiz, Carlos
Sent: Thursday, June 09, 2005 2:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Private Calls


We have started to implement Centrex PRI's at some of our locations.  The
telco settings require us to set Protocol DMS-100 and to mark the calls as
private (numbering plan).  When I call my cell phone I see the correct 10
digit caller id.  When I call my house I get a message saying that the call
is being screened by privavcy director (service to screen private or unknown
calls).  This did not happen with the older PRI's. Anyone know if there is a
setting on the MGCP PRI page that would alleviate this issue? Other
solutions?

Thanks

Carlos Ortiz