[cisco-voip] 1760 MGCP Gateway on CCM 4.1(2)

[Gary Roberton]

Hello all

We have been having trouble for several weeks now and would like to
hear from anyone having similar trouble as I want to know how
widespread our type of problem is.

We have a Call Manager which was running on 3.3(3) which we upgraded
to 4.1(2).   The upgrade was smooth although we hit the problem where
the agent that monitors changes in the call manager database was not
working correctly so changes to route filters were being ignored. 
This was fixed with an ES.

At the same time we also had a remote site to install which was using
a 1760 and Euro ISDN2e.  We decided to use MGCP for this gateway but
the call manager always tries to configure the ISDN BRI card in slot
0, no matter which slot it is in!  If we do put it in slot 0 the
config is downloaded to the router but the ISDN will not come up at
layer 2.  I will not bore you all with the details here but we have
tried various levels of IOS and have had a TAC case open for several
weeks.  Cisco have built this and confirmed it to be a problem - but I
want to try to gauge if other people are seeing similar problems and
if so how they are getting around them.

TIA

Gary