[cisco-voip] Sip t.38 device

[Brian Turnbow]

The data sheets all list t.38 as "pending" but they do say that fax pass thru is supported. 
I contacted my local reseller and the sales rep says they are close but t.38 is not yet supported , so I don't know 
What to believe!
Thanks
Brian 

-----Original Message-----
From: Andre Reid [mailto:andre.reid at linesider.net] 
Sent: lunedì 13 giugno 2005 14.29
To: Yura Monchak; Brian Turnbow
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Sip t.38 device

I've used the Sipura for faxing, the SPA-2000, running SIP. It has t.38 options on the web configuration page. 

I don't know what Sipura says they support? 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Yura Monchak
Sent: Monday, June 13, 2005 8:20 AM
To: Brian Turnbow
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Sip t.38 device

Brian Turnbow wrote:

>The web site says they don't yet, do they?
>  
>
I've looked througgh the website, and yes, you are right.
I was sure I saw a T.38 fax recieved with SIPURA, now I am not.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 6/11/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 6/11/2005