[cisco-voip] IVR on Cisco Router and Voip Dial Peer

[Geoffrey Cauchi]

Further to my previous mail, I did some more debugging and
the problem might be with the script.  Does anyone have a
basic sample script that can be used on a VoIP dial Peer?

Thanks
Gef

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Geoffrey Cauchi
Sent: 16 June 2005 21:59
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] IVR on Cisco Router and Voip Dial Peer

Hi
I'm trying to configure the ivr prompt on a VOIP Dial peer.
The Cisco Router has the IOS version 12.3 (14)T2 with the
ipipgw feature set installed.

Unfortunately the IVR is not kicking in.  

The dial peer is configured as follows:

dial-peer voice 320 voip
 description Voip Phone Dial Peer
 service IVR_TEST
 service IVR_TEST out-bound
 destination-pattern 356356356
 voice-class codec 1
 session target ipv4:192.168.9.5

And other relevant parts of the config are:

voice class codec 1
 codec preference 1 g729r8
 codec preference 2 g723r63
 codec preference 3 g711ulaw
 codec preference 4 g711alaw

application
 service IVR_TEST flash:test.tcl
  paramspace english language en
  paramspace english index 1
  paramspace english location flash:
  param warn-time 60
  paramspace english prefix en
  param uid-len 5
  param pin-length 4
 !
 session
  start IVR_TEST IVR_TEST 

Anyone has any suggestion why this config is not working?

Thanks in advance
Gef


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip