[cisco-voip] CCM - CLI and hunt forward

[Vincent De Keyzer]

Wes,

I can't get this working (and my Cisco reseller's helpdesk has been banging
his head against the wall with this too for the last few days).

I have defined the TP 9099 -> cell phone.

When I dial 9099 from DN 8951, everything goes OK: the outgoing call show
the "Calling Party Transform Mask" I have defined in the TP.

When I call the HP 8953, still from DN 8951, it first makes the phone in the
line group ring, then diverts (no answer) onto the call phone, but the
outgoing call shows CLI = 8953 (and not anymore the "Calling Party Transform
Mask")!...

It seems that the HP is somehow overriding the calling number settings of
the TP?...

Vincent


> -----Original Message-----
> From: Wes Sisk [mailto:wsisk at cisco.com]
> Sent: vendredi 17 juin 2005 14:25
> To: Vincent De Keyzer; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] CCM - CLI and hunt forward
> 
> Vincent,
> 
> configure your hunt no answer destination to match a transaltion pattern.
> use the translation pattern to modify the calling party name/number, then
> modify the called party number to be the cell phone number.
> 
> /Wes
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Vincent De Keyzer
> Sent: Friday, June 17, 2005 8:00 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CCM - CLI and hunt forward
> 
> 
> Hello people,
> 
> I have the following problem with CLI and huntlist on CCM 4.1 (H.323
> gateways, not MGCP).
> 
> I would like to have the following: hunt-list with only one line group
> (helpdesk), and, in case of no answer, call is forwarded to a mobile
> phone.
> For this, I am using the "Hunt Forward Settings" of the Hunt Pilot (new
> feature in 4.1 I believe).
> 
> Trouble is: for billing reasons, I need this outgoing call to have a
> specific CLI, and I don't seem to be able force it to what I want.
> 
> Can anyone help?
> 
> Vincent