[cisco-voip] QRT tool....

[ALI Rijas Mannanthara]

I enabled CEF and trying to configure QRT on phones as we have poor
voice quality in one of the campus buildings.

 

When I press QRT on phone it says "Service not active ".

 

Cisco needs to reset the ccmsysuser password as the services may again
synchronize with AD. Do this affect any services of call manager
including directory listing .

Please let me know any thing else I should try.

 

Thanks ,

 

Rijas

EPBX : 6226

VoIP : 248-994-4858

 

This E-Mail is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential, and exempt from disclosure. If the reader of this document
is not the intended recipient or an employee or agent responsible for
delivering this document to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
document is strictly prohibited. If you have received this document in
error, please delete it. Thank you. 

 

Confidentiality Statement:

This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, please note that you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by return email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050622/7f5f8573/attachment-0001.html