[cisco-voip] translation rule - MGCP

[Marcin Nowacki]

Hello

I would like to add translation rule to incoming numbers , I have CCM
4.1(3) with MGCP Gateway.
	 Normally ( with H.323 configuration )  I would add it as
incoming translation rule to incoming E1 port but how to configure it
when we have MGCP configured. I would like to add rule as below:

translation-rule 1
 Rule 1 ^89 0
 Rule 2 ^1 001
 Rule 3 ^2 002
 Rule 4 ^3 003
 Rule 5 ^4 004
 Rule 6 ^5 005
 Rule 7 ^6 006
 Rule 8 ^7 007
 Rule 9 ^9 009

Where should I add it . Can it be configured somewhere on Call Manager ?

Greetings Marcin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050623/bfd9c87e/attachment-0001.html