[cisco-voip] Unity 5.0

[Ortiz, Carlos]

You needed the Unity SP CD 3 because your Exchange 2003 install did not
have SP1 applied correct?  I will be running this on my lab servers
first so I will see everything that I need.  Any post install issues?
Thanks for the advice....

 

Carlos

 

________________________________

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Friday, June 24, 2005 10:16 AM
To: Ortiz, Carlos; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity 5.0

 

I just finished a 4.0.4 to 4.0.5 upgrade.  MAKE SURE YOU HAVE EVERYTHING
YOU NEED.  I had a two hour window to install and it took me three.  I
didn't have all the CD's needed so I had to download and unzip which
added about an hour to an hour and a half to the install.

 

You need cd 1 and 3 for the Service Packs at
http://www.cisco.com/cgi-bin/tablebuild.pl/unity-40

 

And a minimum of CD 1 and 3 from
http://www.cisco.com/cgi-bin/Software/Tablebuild/tablebuild.pl/4yutni0
more if you're adding things like second languages.

 

I ended up needing CD 15 also.

 

I hated that several times the installer failed to respond ("not
responding").  But eventually it continued.

 

Looks like I'm back up and running.

 

Just my two cents.

 

Scott

 

 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ortiz, Carlos
Sent: Friday, June 24, 2005 5:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity 5.0

 

I am running Windows 2003 server and Exchange 2003 SP1.  I would like to
upgrade to 4.05.  Anyone running this setup yet?  Any advice or gotchas
to look out for?

 

 

Carlos

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050624/db326e8a/attachment.html