[cisco-voip] Unity 4.05 upgrade

[Wells, Colin]

I had a problem running Exchange 2003 SP1 with my Unity 4.0.4 SR1 ES35 after
the Exchange SP was applied.  I just added my Unity service account in the
local admin group of the Exchange cluster, and Unity could access the mail
store again.  I had the understanding that was the only work around for
running 4.0.4 with Exch 2003 SP1, and 4.0.5 resolved the problem.  Have you
all heard of another work around that wouldn't require adding the Unity
service account to the local admin group of each remote Exch server?

-Colin

 

 

  _____  

From: Ortiz, Carlos [mailto:CORTIZ at broward.org] 
Sent: Tuesday, June 28, 2005 12:33 PM
To: Oliver Rebollido; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity 4.05 upgrade

 

Was your Exchange Environment already running SP1 when you installed Unity?

 

Carlos

 

  _____  

From: Oliver Rebollido [mailto:ORebollido at fenwick.com] 
Sent: Tuesday, June 28, 2005 1:26 PM
To: Ortiz, Carlos; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity 4.05 upgrade

 

I did a clean install to 4.0.5 and have not had any problems so far.  My
setup is exactly what you have listed below except I'm on Unity 4.0.5.

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ortiz, Carlos
Sent: Tuesday, June 28, 2005 5:19 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity 4.05 upgrade

Does anyone else have/had this scenario?

 

Windows 2003 AD no service packs applied

Exchange 2003 , SP1

Unity 4.03 sr1

 

 

When I looked into upgrading to 4.04 a while back the release notes
discussed an issue upgrading to 4.04 if Exchange SP1 was already applied. It
would have required us to uninstall Exchange 2003 SP1 run the permissions
wizard on the Unity server and then reinstall Exchange 2003 SP1.  I talked
to TAC about this and this issue should be resolved with 4.05, but I was
wondering if anyone has done it yet.

 

Thanks

 

Carlos

 

In accordance with revised Circular 230, any tax advice in this
communication is not intended or written by Fenwick & West to be
used and cannot be used by a taxpayer for the purpose of avoiding
penalties that may be imposed on the taxpayer.
----------------------------------------------------------------------
ATTENTION:
The information contained in this message may be legally privileged
and confidential. It is intended to be read only by the individual
or entity to whom it is addressed or by their designee. If the reader
of this message is not the intended recipient, you are on notice that
any distribution of this message, in any form, is strictly prohibited. 

If you have received this message in error, please immediately notify
the sender and/or Fenwick & West LLP by telephone at (650) 988-8500 
and delete or destroy any copy of this message.
 
 
This communication is from a law firm and may contain confidential and/or privileged information. If it has been sent to you in error, please contact the sender for instructions concerning return or destruction, and do not use or disclose the contents to others.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050628/1fc61fc0/attachment-0001.html