[cisco-voip] CTI Route Point Status

[Ryan Ratliff]

Not 100% sure to be honest.  Any timeout would be a pretty long one 
though as I think I've had phones show up with old IP addresses for a 
week or more in the lab.

-Ryan
On Jun 28, 2005, at 5:44 PM, Paul Yago wrote:

Thanks Ryan,

Are you certain that it requires a restart to erase this information, or
is it wiped after a certain timeout?

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com]
Sent: Tuesday, June 28, 2005 2:38 PM
To: Paul Yago
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CTI Route Point Status

In general in the CCMAdmin status indicates whether a device is
registered or not.    If the device has been previously registered, or
has attempted to register before the last time CCM was restarted then
its IP address will show up.  The only difference between "Not Found"
and "Not Registered" is that a device will have been registered
previously (or attempted to) for it to show as "Not Registered".

-Ryan
On Jun 28, 2005, at 4:59 PM, Paul Yago wrote:

Hello, in the CTI Route Point summary screen "Find and list CTI Route
Points". There is both a Status and an IP Address field. I've been
trying to find some clarification about the values of these fields in
cases where the 3rd party device is not available.

Sometimes our CTIRP has the Status="Not Found" with no IPAddress = '',
and other times Status="Not Registered", and IP Address="10.2.0.51".
This is a 3rd party device which has been registered many times
previously.

What conditions are triggering the status in this case? Is there a
timeout. Is it configurable?

Thanks,
Paul

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip