[cisco-voip] Callmanager access to PRI thru Remote CallManager

[Lelio Fulgenzi]

A route pattern on A that points to B over ICT and then a route pattern on B that sends the call out to the PRI.

The calling search space of the ICT on B will be used to select the route pattern on B.

-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
mob lawyer: your people insulted my brother.
dr. house: what? romano in the parmesan cheese shaker again?
  ----- Original Message ----- 
  From: Nasser Khwaja 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, May 02, 2005 11:02 AM
  Subject: [cisco-voip] Callmanager access to PRI thru Remote CallManager


  Hi,
  I have a Central CallManager(A) that is connected to a Remote
  CallManager(B) through an
  InterCluster Trunk. A needs to use a PRI that terminates on B.
  How can  this be done?
  Thanks
  -Nasser.

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050502/ef16eae5/attachment-0001.html