[cisco-voip] Fax and DID

[David Pitkin]

I looked into this myself and did not find a way to send the DID numbers
out from a FXS port which I think is what you also want.

 

I was going to reuse an older Nortel switch but instead bought a VG248
for fax lines.

 

David [ p. 603-669-8553 x6908 e. davidp at bostonpost.com
<mailto:davidp at bostonpost.com>  ]

 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Marus
Sent: Monday, May 02, 2005 6:24 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Fax and DID

 

Do cisco fxs ports on a mgcp gateway and Callmanager 4.1 support any
type of analog DID communication?

 

The application I have in mind is a fax server such as faxination or
rightfax. These applications support the use of a ANALOG DID lines in
order to route calls to approprate fax mail boxes.

 

Something like this:

DID 555-555-1200 ---> MGCP PRI  ---> Callamanager Route Pattern  --->
MGCP FXS Port  ---> Brooktrout Fax Board Analog DID

 

The Faz board sees the 1200 extension that callmanager would pass prior
to the call using analog DID.

 

I've done this on other phone systems before. I know the
Brooktrout/Dialogic board and the fax application support it. I am just
not sure that the capability in Callmanager is there to send the
extesion over analog DID. 

 

 


-- 
Nick Marus
nmarus at gmail.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050504/c949f70d/attachment-0001.html