[cisco-voip] Adding Prefix digits to AS5400 voice port ?

[Ryan Fields]

Hi All,

Is there a way to put a prefix on incoming calls received by an e1 trunk?
I'm trying to configure an AS5400 E1 pri.

I'd like to emulate the functionality of the "Prefix DN" option
used on mgcp gateways configured on a callmanager.

Tried the config below but it didn't work, no matching performed:

translation-rule 1
 rule 0 ^01 5551

voice-port 2/0:D
 translate called 1

dial-peer voice 100 voip
 destination-pattern 5551T
 session target ipv4:172.16.10.23
 ip precedence 5 
  dtmf-relay h245-alphanumeric 


Did I miss something?


Thanks,
Ryan