[cisco-voip] IP phones rebooting after upgrade to 4.1(2) and power outage

[Vincent De Keyzer]

Hello,

 

we upgraded early this week from 4.0 to 4.1(2), and it went almost OK.

 

But this morning we had a power outage in a room, and the phones in that
room won't boot anymore - they cycle through "Configuring VLAN ->
Configuring IP via DHCP -> Configuring CM List -> Registering -> BOOT
again."

 

I can reproduce on my test phone - I disconnected it from mains and now it
boot-cycling also.

 

Any ideas?

 

Vincent

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050506/670e1463/attachment-0001.html