[cisco-voip] ATA- H323 terminal
Greg Arthmann
garthmann at data-corporation.com
Mon May 9 10:17:55 EDT 2005
You need to upgrade the code on the ATA to H323 firmware. Download from CCO.
Greg Arthmann
Network Consultant
Phone (786)554-2958
www.data-corporation.com
"Cisco IP Telephony Partner"
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net on behalf of cisco-voip-request at puck.nether.net
Sent: Mon 5/9/2005 10:08 AM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 27, Issue 25
Send cisco-voip mailing list submissions to
cisco-voip at puck.nether.net
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-request at puck.nether.net
You can reach the person managing the list at
cisco-voip-owner at puck.nether.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Re: How to configure ATA to use with Call Manager
(Brain Whistler)
2. SIP source port? (Gerd Feiner)
3. Customizing AA.aef with the CRA Editor (Robin Inderberg)
4. DNIS or DTMF from Cisco FXS lines to third party equipment.
(Nick Marus)
5. NM-HDV2 and ISDN data backup (Arkadiusz Kuczorski)
6. Callmanager & Interstar XMediusFAX (Miljenko Tkalec)
7. Upgrade Assistant Utility 4.1(3) (Nick Kassel)
----------------------------------------------------------------------
Message: 1
Date: Mon, 9 May 2005 02:25:55 -0700 (PDT)
From: Brain Whistler <brainwhistler at yahoo.com>
Subject: Re: [cisco-voip] How to configure ATA to use with Call
Manager
To: cisco-voip at puck.nether.net
Message-ID: <20050509092555.4257.qmail at web30014.mail.mud.yahoo.com>
Content-Type: text/plain; charset=us-ascii
Anyone has any info ragarding below
Thanks
Brain
--- Brain Whistler <brainwhistler at yahoo.com> wrote:
> Hi,
>
> Does anyone know that how to configure Cisco ATA 186
> to use with Cisco Call Manager using H323. I want to
> use it for both inbound and outbound calls.
>
> Actually, my VoIP service provider requires H323 for
> call setup. I have already tried skinny on these
> devices but it didnt work for my PSTN/Long distance
> calls although i was able use it within my call
> manager setup.
>
> I would appreciate if anyone can give a better idea
> using skinny for my outbound/ inbound calls OR how
> to
> configure ATA as H323 terminal.
>
> Thanks
>
> Brain
>
>
> __________________________________
> Yahoo! Mail Mobile
> Take Yahoo! Mail with you! Check email on your
> mobile phone.
> http://mobile.yahoo.com/learn/mail
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
------------------------------
Message: 2
Date: Mon, 9 May 2005 12:51:42 +0200
From: Gerd Feiner <g.feiner at cablesurf.de>
Subject: [cisco-voip] SIP source port?
To: "'cisco-voip at puck.nether.net'" <cisco-voip at puck.nether.net>
Message-ID: <4b8460b37f1293ef32c9f49cda0d37fc at cablesurf.de>
Content-Type: text/plain; charset="us-ascii"
Hi,
is there a possibility for configuring the AS5350 to send out SIP
messages from port 5060? It seems, that when a call is coming in via
PSTN, the AS5350 picks an arbitrary port to send the SIP INVITE from -
and this is confusing SER afterwards in that the BYE request (when
haning up the SIP phone) gets routed to the port the initial
SIP-request came from. This is the denied with an ICMP port
unreachable.
regards,
Gerd
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 186 bytes
Desc: Signierter Teil der Nachricht
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050509/35147b23/PGP-0001.bin
------------------------------
Message: 3
Date: Mon, 9 May 2005 14:09:55 +0200
From: "Robin Inderberg" <robin.inderberg at candidator.se>
Subject: [cisco-voip] Customizing AA.aef with the CRA Editor
To: <cisco-voip at puck.nether.net>
Message-ID:
<39EB1FE59758D9448A5D0B348857C727114C00 at cannt04.candidator.se>
Content-Type: text/plain; charset="iso-8859-1"
Hello once again!
I got an answer on my last question, and maybe i could get some help on this one too?
I have installed my Cisco IVR now, and got my Cisco CRA Editor, yippiekayey!
My question is, have anyone customized their AA.aef script here? Maybe someone could send me a samplescript of yours? Or send me a good page howto build a AA with the CRA Editor?
Thanks too all of you on this mail list!
Best Regards
Robin Inderberg
........................................................................................
Candidator AB
Malmgatan 15
441 39 ALINGS?S
telefon 0322-671000
direkt 0322-671019
e-mail robin.inderberg at candidator.se
web www.candidator.se
........................................................................................
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050509/b352b1be/attachment-0001.html
------------------------------
Message: 4
Date: Mon, 9 May 2005 08:29:38 -0400
From: Nick Marus <nmarus at gmail.com>
Subject: [cisco-voip] DNIS or DTMF from Cisco FXS lines to third party
equipment.
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Message-ID: <1a9f6d3f050509052974032d99 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Is it possible to DNIS digits or send DTMF out a Gateway fxs port to a thrid
party analog fax server?
If so, where is this confured?
--
Nick Marus
nmarus at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050509/56f87d52/attachment-0001.html
------------------------------
Message: 5
Date: Mon, 9 May 2005 15:26:03 +0200
From: "Arkadiusz Kuczorski" <akuczorski at wp.pl>
Subject: [cisco-voip] NM-HDV2 and ISDN data backup
To: cisco-voip <cisco-voip at puck.nether.net>
Message-ID: <427f64eb42ec5 at wp.pl>
Content-Type: text/plain; charset=iso-8859-2
Hello All,
I need some advice regards NM-HDV2-2T1/E1. Does this module can be used to perform ISDN dial backup ?
Q&A (http://www.cisco.com/warp/public/cc/pd/nemnsw/callmn/prodlit/sopra_qa.pdf) is stated that
it doesn't "...support integrated voice and serial WAN data access over PRI" but I wonder about
"INTEGRATED voice and serial WAN". Is that mean voice and data couldn't be used on single interface,
or at all ? Can I configure E1 PRI (voice) on one port and E1 PRI (Data) on the second and perform ISDN dial-in backup
from other routers ?
TIA
Arek
----------------------------------------------------
Rozmawiaj ze stacjonarnego do 95% taniej!
Zasi?g Polska i 52 kraje sprawd? nas! -> telefon.wp.pl
http://klik.wp.pl/?adr=www.telefon.wp.pl&sid=373
------------------------------
Message: 6
Date: Mon, 9 May 2005 16:01:12 +0200
From: "Miljenko Tkalec" <mtkalec at cs.hr>
Subject: [cisco-voip] Callmanager & Interstar XMediusFAX
To: <cisco-voip at puck.nether.net>
Message-ID:
<18F217DAB469444DB9910DB73B02E2AF1C5C35 at LISABON.intranet.cs.hr>
Content-Type: text/plain; charset="us-ascii"
We have H.323 configuration based on Callmanager 4.1(2), Cisco 3745 and
third party fax server Interstar XMediusFAX.
That fax server is supporting H.323 and T.38. Everything is working fine
if I create dial-peer on 3745 that points directly to fax servers IP.
If I configured fax server and Cisco 3745 as H.323 gateways on
Callmanager the problem is that, after the call established we do not
hear Xmedius Fax signal (a silence instead) and, after a few seconds,
the call is released.
I have tried to use MGCP gateway instead of 3745. Without any luck.
So please does anybody have any idea how to solve that problem.
---------------------------------------------------------------------------------------------------
Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene osobama oznacenima kao primateljima te se pristup od strane bilo koje druge osobe smatra neovlastenim. Ukoliko niste oznaceni primatelj, svaka distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim osobama je strogo zabranjeno i smatra se protuzakonitim. Ukoliko ste dobili ovu poruku, a niste oznaceni primatelj, molimo Vas da sto prije obavijestite posiljatelja poruke i unistite sve postojece kopije.
Ova napomena takodjer potvrdjuje da je ova elektronicka poruka testirana na postojanje racunalnih virusa.
---------------------------------------------------------------------------------------------------
The information in this email is confidential and it is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any distribution, copying, duplication or disclosure is prohibited and may be unlawful. If you have received this email in error, please notify the sender immediately and destroy it, and all copies of it.
This footnote also confirms that this email message has been swept for the presence of computer viruses.
---------------------------------------------------------------------------------------------------
------------------------------
Message: 7
Date: Mon, 9 May 2005 15:06:10 +0100
From: "Nick Kassel" <Nick.Kassel at Charles-Stanley.co.uk>
Subject: [cisco-voip] Upgrade Assistant Utility 4.1(3)
To: <cisco-voip at puck.nether.net>
Message-ID:
<C0426FFA2483574C8256AF89257E4ABE0866D687 at CSEXCH01.charles-stanley.co.uk>
Content-Type: text/plain; charset="us-ascii"
I have run the upgrade utility on my test subscriber and I am getting
the following error message for the DC Directory Health check
Dcdhealthc : Err : Could not create the idispatch object . error code 2
This error does not appear in the list of error fixes.
Has anyone come across this before?
***********************************************************************************************
The information contained in this e-mail is strictly confidential, some or all
of which may be legally privileged. It is for the intended recipient only.
Access to this e-mail by any other person is prohibited. If you are not the
intended recipient, any use, disclosure, copying, printing, distribution of,
replying to or any action taken or omitted to be taken in reliance on this
e-mail, is prohibited and may be unlawful. Please contact the sender immediately
should this e-mail have been incorrectly addressed or transmitted.
You accept that any instructions are deemed to have been given at the time the
recipient(s) accesses them and that delivery receipt does not constitute
acknowledgement or receipt by the intended recipient(s). You accept that there
may be a delay in processing the instructions received from e-mails after
Charles Stanley has received them. You are advised that urgent, time sensitive
and confidential communications should not be sent by e-mail.
You acknowledge that e-mails are not secure and you accept the risk of
malfunction, viruses, unauthorised interference, mis-delivery or delay.
************************************************************************************************
Charles Stanley & Co. Ltd
Registered Office: 25 Luke Street London EC2A 4AR
Tel: 0207 739 8200 Fax: 0207 739 7798
Registered in England No. 1903304
Charles Stanley Sutherlands and Tozer Wingate are divisions of Charles Stanley & Co. Ltd
Authorised and Regulated by the Financial Services Authority, Member of the
London Stock Exchange, International Securities Markets Association, and The London International Financial Futures &
Options Exchange.
This footnote also confirms that this email message has been swept by McAfee
VirusScan and SurfControl Email Filter software.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050509/e401732b/attachment.html
------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
End of cisco-voip Digest, Vol 27, Issue 25
******************************************
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 9031 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050509/76c0a0c1/attachment.bin
More information about the cisco-voip
mailing list