[cisco-voip] IAD2431-1T1E1 ; where is T1 ?

[Andriy A. Yerofyeyev]

Hi !

Recently we have bought 2 IAD2431-1E1T1, and I have strange problem with 
configuring T1 on this IAD's.
On front of device I can see 2 ports marked as T1E1 1/1 and T1E11/0 but 
can't see T1/PRI ports in hardware configuration. Devices marked as 
IAD2431-1T11E1.


Photos of device,bad quality ;(   :
http://tinyurl.com/br5mf (front)
http://tinyurl.com/aaxo4 (without cover)
http://tinyurl.com/9l4zs (without cover)


sh ver
Cisco IOS Software, 2400 Software (C2400-IS-M), Version 12.3(11)T2, 
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Thu 28-Oct-04 21:36 by cmong

ROM: System Bootstrap, Version 12.3(7r)T2, RELEASE SOFTWARE (fc1)

vgw-1-fa uptime is 49 minutes
System returned to ROM by reload at 15:13:27 EDT Mon May 9 2005
System restarted at 15:15:01 EDT Mon May 9 2005
System image file is "flash:c2430-is-mz.123-11.T2.bin"

Cisco IAD2431 (R527x) processor (revision 3.0) with 119808K/11264K bytes 
of memory.
Processor board ID FHK0818U06R
R527x CPU at 225MHz, Implementation 40, Rev 3.1
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
63K bytes of non-volatile configuration memory.
System fpga version is 250025
System readonly fpga version is 20001E
Option for system fpga is 'system'.
62976K bytes of ATA System CompactFlash (Read/Write)
0K bytes of ATA Slot0 CompactFlash (Read/Write)

Configuration register is 0x102

sh hardware
Cisco IOS Software, 2400 Software (C2400-IS-M), Version 12.3(11)T2, 
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Thu 28-Oct-04 21:36 by cmong

ROM: System Bootstrap, Version 12.3(7r)T2, RELEASE SOFTWARE (fc1)

vgw-1-fa uptime is 49 minutes
System returned to ROM by reload at 15:13:27 EDT Mon May 9 2005
System restarted at 15:15:01 EDT Mon May 9 2005
System image file is "flash:c2430-is-mz.123-11.T2.bin"

Cisco IAD2431 (R527x) processor (revision 3.0) with 119808K/11264K bytes 
of memory.
Processor board ID FHK0818U06R
R527x CPU at 225MHz, Implementation 40, Rev 3.1
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
63K bytes of non-volatile configuration memory.
System fpga version is 250025
System readonly fpga version is 20001E
Option for system fpga is 'system'.
62976K bytes of ATA System CompactFlash (Read/Write)
0K bytes of ATA Slot0 CompactFlash (Read/Write)

Configuration register is 0x102



-- 

Best regards,

Andriy A. Yerofyeyev
Direct : 1-718-732-3803