[cisco-voip] CME, VPN, PIX IOS

[Jim McBurnett]

Hello!
I have been testing a little something and I was wondering if anyone
else has seen this..

CME ver 3.2
PIX 6.3.3(132) on a 501

IP phone
   |
PIX 501
   |
Internet
   |
2811 with CME/VPN
   |
POTS lines

I have one way audio on the IP phone at the PIX location.
It does not matter how I try to call- To POTS or to other IP phones at
the 2811 site, the other end can hear me, but not the other may around.

I have good ping times (sub 50ms)
Packet size has been adjusted up and down from 1400 to 1492

The VPN works fine for other DATA.. The Circuit was monitored on both
ends, neither was even approaching 30% capacity

I have check the VPN access-list and it all seems fine Traffic is
flowing for all the correct IP addresses.

Thanks,
Jim