[cisco-voip] AS5350 SER and CLIP

[Yura Monchak]

Maciej Bylica wrote:

>Gerd Feiner wrote:
>  
>
>>Hi,
>>
>>I can't seem to get CLIP working with my SIP phones?  The TDM-switch 
>>(Softswitch) sees the CLI of the calling (SIP-)party, but it get's not 
>>displayed on the callees PSTN-side.  What's causing this and how to 
>>avoid it?  We want CLIP to be enabled per default.
>>
>>Brgds,
>>Gerd
>>
>>    
>>
>Hi
>
>I had the same problem on Cisco AS5300 with IOS ver 12.2(15)
>See here for details 
>http://www.erlang.com/forum/voip/thread.htx?thread=2915#10699.
>
>I was struggling with this problem a few days and finally changed the IOS.
>
>I hope this can help, but still i am not sure if this is a kind of bug 
>on ver 12.2(15).
>
>Cheers,
>Maciej.
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>  
>
I can suggest you trying translation rules. It is possible that your 
ISDN termination partner does not support CLI in the format you are 
trying to send. National usually works. Here is an example:

translation-rule 100
rule 0 123 456 any national
...

apply the rule to incoming voip CLIs:

voip-incoming translation-rule calling 100

Good luck.

--
Yura Monchak