[cisco-voip] FW Services Module and CM Route Groups

[Ryan Ratliff]

Is it an MGCP gateway?  CM will tell an MGCP gateway to send to 0.0.0.0 
when the gateway is placed on hold.

HTH

-Ryan
On May 19, 2005, at 4:00 PM, Candace Holman wrote:

  Our FW Services Module logs have been filling up with numerous errors 
that are linked to the use of Route Lists and Route Groups on CM 
3.3.x.  For example we use one R.G. to group 2 pris so that the second 
pri is reached automatically when the firs is saturated.

  The errors take this form and are quite numerous:
May 18 16:58:36 fw-name May 18 2005 16:58:36 fw-name: %FWSM-3-305005: 
No translation group found for udp src intvlanxxx:[PRI address]/28300 
dst intvlanyyy:0.0.0.0/0
  May 18 16:58:36 fw-name May 18 2005 16:58:36 fw-name : %FWSM-3-305005: 
No translation group found for udp src intvlanxxx:[PRI address]/0 dst 
intvlanyyy:0.0.0.0/0

We have a similar set of errors from another Route Group for our analog 
line gateways, and no errors for gateways not in a Route Group.

  Have I misconfigured something or is this a bug, that the dst address 
is a default 0.0.0.0, and therefore no translation group is found?  Any 
ideas?

  Candace
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip