[cisco-voip] FW Services Module and CM Route Groups

[Kevin Thorngren]

Hi Candace,

Ryan is correct.  CCM is sending a message similar to this when a call 
is being placed on hold:
MDCX 2717351 AALN/S0/SU2/1 at TAC1760-01 MGCP 0.1
C: A00000000214437c
I: 3
X: 0
L: p:20, a:G.729, s:off
M: sendrecv
R: L/hu, D/[0-9ABCD*#]
S:
Q: process,loop
v=0
o=- 3 0 IN EPN AALN/S0/SU2/1 at TAC1760-01
s=Cisco SDP 0
t=0 0
c=IN IP4 0.0.0.0
m=audio 0 RTP/AVP 18

The IP Address and UDP Port in the last two lines are causing this 
message in the FW log:
  May 18 16:58:36 fw-name May 18 2005 16:58:36 fw-name : %FWSM-3-305005:
No translation group found for udp src intvlanxxx:[PRI address]/0 dst
intvlanyyy:0.0.0.0/0

HTH,
Kevin
On May 19, 2005, at 4:58 PM, Candace Holman wrote:

> It is.  What does it mean for an MGCP gateway to be placed on hold - 
> just
> an idle status?  It is only happening for devices in Route Groups so I
> thought it had to do with a seek behavior.
>
> Candace
>
> At 04:49 PM 5/19/2005, Ryan Ratliff wrote:
>> Is it an MGCP gateway?  CM will tell an MGCP gateway to send to 
>> 0.0.0.0
>> when the gateway is placed on hold.
>>
>> HTH
>>
>> -Ryan
>> On May 19, 2005, at 4:00 PM, Candace Holman wrote:
>>
>>  Our FW Services Module logs have been filling up with numerous errors
>> that are linked to the use of Route Lists and Route Groups on CM
>> 3.3.x.  For example we use one R.G. to group 2 pris so that the second
>> pri is reached automatically when the firs is saturated.
>>
>>  The errors take this form and are quite numerous:
>> May 18 16:58:36 fw-name May 18 2005 16:58:36 fw-name: %FWSM-3-305005: 
>> No
>> translation group found for udp src intvlanxxx:[PRI address]/28300 dst
>> intvlanyyy:0.0.0.0/0
>>  May 18 16:58:36 fw-name May 18 2005 16:58:36 fw-name : 
>> %FWSM-3-305005:
>> No translation group found for udp src intvlanxxx:[PRI address]/0 dst
>> intvlanyyy:0.0.0.0/0
>>
>> We have a similar set of errors from another Route Group for our 
>> analog
>> line gateways, and no errors for gateways not in a Route Group.
>>
>>  Have I misconfigured something or is this a bug, that the dst 
>> address is
>> a default 0.0.0.0, and therefore no translation group is found?  Any 
>> ideas?
>>
>>  Candace
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>