[cisco-voip] Remote Callmanager on SAT link

[Trey Howland]

Thanks for the response.  I need the PRI to extend across the sat link 
to support legacy tactical PBX's.   The router would possibly be 
connected to that PBX on a t1 card.  So I'm looking at something 
similar to a Shout 900 
[http://www.net.com/products/products_shoutip.shtml].  Is there 
something in the Cisco line that provides a similar function?

Trey


On May 17, 2005, at 10:23 AM, Wes Sisk wrote:

> Hi Trey,
>
> GT CMPE grad in 1999.  You can put an h323 gateway or MGCP gateway 
> over a satellinte hop away from CM.  I would recommned using h323 so 
> the call routing logic stays on the router and keepalives are not 
> constantly exchanged beteen CM and the gateway.  Additinally, MGCP 
> uses UDP.  Is your link proned to drops?  If you choose to go MGCP, 
> you can use h323 fallback so when the gw looses IP connectivity to CM, 
> it operates in h323 mode.
>
> /Wes
>
> Trey Howland wrote:
>
>> I have a customer who requires their PRI or T1 CAS circuit to be 
>> terminated on
>> the remote end.  I'm looking for a solution for extending this across 
>> a IP
>> satellite link? Anyone have experience or pointers?
>>
>> Thanks,
>> Trey
>>
>>
>>
Georgia Institute of Technology     Atlanta, Georgia
Georgia Tech Research Institute
Electronic Systems Laboratory

Public Key ID: 0x894F4419
[7338 D848 8BEE FF6D 23D1  4355 2F6C DE0C 894F 4419]