[cisco-voip] how to block analog phone from dialing LD

[Erick Bergquist]

Also,

May want to consider using FAC/CMCs and/or Time of Day
Partitions which are both new features in 4.1 which
could make things easier.

But I'm with lelio, just don't give lobby phones a CSS
with access to LD route patterns if it is not to be
allowed at all. 

--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> It all depends on how you are granting long distance
> access in the first place. But in a nutshell, access
> to long distance is through a route pattern(s) which
> points to a PSTN gateway. Simply remove access to
> this route pattern and the phone will not be able to
> dial long distance. Access to any DN/pattern is
> typically granted by putting the partition which
> contains the target DN/pattern in the calling search
> space of the device/line for which you want to grant
> access. By removing this partition, you remove
> access.
> 
> Depending on your dialplan, however, you may be
> removing more than just long distance access by
> removing the partition. The partition may contain
> local and 911 access for example.
> 
> You can also use a route pattern which blocks access
> if that is easier. The most exact match wins - with
> the line's partitions taking precedence if a tie
> happens.
> 
> If you can post how things are done in your
> dialplan, we might be able to help a little more.
> 
> Lelio
> 
> -----                                               
>                 -----
> Lelio Fulgenzi, B.A.                                
>  lelio at uoguelph.ca.eh
> Network Analyst (CCS)
> University of Guelph                            
> FAX:(519) 767-1060 JNHN
> Guelph, Ontario N1G 2W1                         
> TEL:(519) 824-4120 x56354
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> mob lawyer: your people insulted my brother.
> dr. house: what? romano in the parmesan cheese
> shaker again?
>   ----- Original Message ----- 
>   From: AA 
>   To: cisco-voip at puck.nether.net 
>   Sent: Saturday, May 21, 2005 7:23 PM
>   Subject: [cisco-voip] how to block analog phone
> from dialing LD 
> 
> 
>   we have CM 4.1.2  and have some analog phones in
> the break room need  to be block from dialing LD. 
> How do we do this.  We are using mgcp.  Please help
> 
> 
>   James Grace 
>   System Engineer /Professional Srvc.
>   MCSE MCSA MCDBA CCNA CCNP CQS
> 
> 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
>   _______________________________________________
>   cisco-voip mailing list
>   cisco-voip at puck.nether.net
>  
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



		
__________________________________ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail