[cisco-voip] Stupid Question - how to make directory on flash filesystem with IOS

[Anthony Mendoza]

I'm running:

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

ny-1700-5 uptime is 53 minutes
System returned to ROM by reload at 00:11:57 EDT Thu May 26 2005
System restarted at 00:15:00 EDT Thu May 26 2005
System image file is "flash:c1700-sv8y7-mz.123-4.T6.bin"

and am preparing this box for a CME install..

I want to put the GUI files in /html off the flash, however, I can't
seem to find the command to make a directory..I thought it was mkdir,
but from ? output below you can see it isn't listed...am I crazy or is
there no way to create a directory on the load I'm at?

ny-1700-5#?
Exec commands:
  <1-99>           Session number to resume
  access-enable    Create a temporary Access-List entry
  access-profile   Apply user-profile to interface
  access-template  Create a temporary Access-List entry
  archive          manage archive files
  audio-prompt     load ivr prompt
  auto             Exec level Automation
  bfe              For manual emergency modes setting
  call             Reload IVR call application, accounting template
  ccm-manager      Call Manager Application exec commands
  cd               Change current directory
  clear            Reset functions
  clock            Manage the system clock
  cns              CNS agents
  configure        Enter configuration mode
  connect          Open a terminal connection
  copy             Copy from one file to another
  debug            Debugging functions (see also 'undebug')
  delete           Delete a file
  dir              List files on a filesystem
  disable          Turn off privileged commands
  disconnect       Disconnect an existing network connection
  enable           Turn on privileged commands
  erase            Erase a filesystem
  exit             Exit from the EXEC
  help             Description of the interactive help system
  isdn             Run an ISDN EXEC command on an ISDN interface
  lock             Lock the terminal
  login            Log in as a particular user
  logout           Exit from the EXEC
  modemui          Start a modem-like user interface
  monitor          Monitoring different system events
  more             Display the contents of a file
  mrinfo           Request neighbor and version information from a
multicast
                   router
  mrm              IP Multicast Routing Monitor Test
  mstat            Show statistics after multiple multicast traceroutes
  mtrace           Trace reverse multicast path from destination to
source
  name-connection  Name an existing network connection
  no               Disable debugging functions
  pad              Open a X.29 PAD connection
  ping             Send echo messages
  ppp              Start IETF Point-to-Point Protocol (PPP)
  pwd              Display current working directory
  release          Release a resource
  reload           Halt and perform a cold restart
  rename           Rename a file
  renew            Renew a resource
  restart          Restart Connection
  resume           Resume an active network connection
  rlogin           Open an rlogin connection
  rsh              Execute a remote command
  send             Send a message to other tty lines
  setup            Run the SETUP command facility
  show             Show running system information
  slip             Start Serial-line IP (SLIP)
  squeeze          Squeeze a filesystem
  start-chat       Start a chat-script on a line
  systat           Display information about terminal lines
  tclquit          Quit Tool Command Language shell
  tclsh            Tool Command Language shell
  telnet           Open a telnet connection
  terminal         Set terminal line parameters
  test             Test subsystems, memory, and interfaces
  traceroute       Trace route to destination
  tunnel           Open a tunnel connection
  udptn            Open an udptn connection
  undebug          Disable debugging functions (see also 'debug')
  verify           Verify a file
  voice            Voice Commands
  where            List active connections
  write            Write running configuration to memory, network, or
terminal
  x28              Become an X.28 PAD
  x3               Set X.3 parameters on PAD

--
Anthony Mendoza


CONFIDENTIALITY NOTICE: The information contained in this message and
or attachments is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination, copying, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you received this e-mail or its attachments in error, 
please contact the sender and delete the material from any system and 
destroy any copies.