[cisco-voip] ATA- H323 terminal

[Brain Whistler]

Yes, i have successfully registered my ATA device to
gatekeeper, please note this gatekeeper resides on my
network not at Telecom end. I am still unable to call
through ATA on gatekeeper setup. CCM is not involved
in this scenario.

Any help on how to use ATA device either through Cisco
Call Manager or Gatekeeper setup. Do i have to create
a dial peer to forward calls to Telecom GK/GW.

thanks
Brain


--- Brian Henry <Brian.Henry at apptis.com> wrote:

> Has the H323 device registered with its Gatekeeper?
> You can make a H323
> Gateway a Gatekeeper as well.
> Let me know and I will dig up some config on H323
> ATA device.
> 
> B
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Brain Whistler
> Sent: Wednesday, May 11, 2005 1:15 AM
> To: Greg Arthmann; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] ATA- H323 terminal
> 
> I have already done this but no success. Is there
> any
> document OR anyone has configured it before.
> 
> Thanks
> Brain
> 
> --- Greg Arthmann <garthmann at data-corporation.com>
> wrote:
> 
> > You need to upgrade the code on the ATA to H323
> > firmware. Download from CCO.
> > 
> > Greg Arthmann
> > Network Consultant
> > Phone (786)554-2958
> > www.data-corporation.com
> > "Cisco IP Telephony Partner" 
> > 
> > 
> > Date: Mon, 9 May 2005 02:25:55 -0700 (PDT)
> > From: Brain Whistler <brainwhistler at yahoo.com>
> > Subject: Re: [cisco-voip] How to configure ATA to
> > use with Call
> > 	Manager 
> > To: cisco-voip at puck.nether.net
> > Message-ID:
> >
>
<20050509092555.4257.qmail at web30014.mail.mud.yahoo.com>
> > Content-Type: text/plain; charset=us-ascii
> > 
> > Anyone has any info ragarding below
> > 
> > Thanks
> > 
> > Brain
> > 
> > 
> > --- Brain Whistler <brainwhistler at yahoo.com>
> wrote:
> > > Hi, 
> > > 
> > > Does anyone know that how to configure Cisco ATA
> > 186
> > > to use with Cisco Call Manager using H323. I
> want
> > to
> > > use it for both inbound and outbound calls. 
> > > 
> > > Actually, my VoIP service provider requires H323
> > for
> > > call setup. I have already tried skinny on these
> > > devices but it didnt work for my PSTN/Long
> > distance
> > > calls although i was able use it within my call
> > > manager setup. 
> > > 
> > > I would appreciate if anyone can give a better
> > idea
> > > using skinny for my outbound/ inbound calls OR
> how
> > > to
> > > configure ATA as H323 terminal. 
> > > 
> > > Thanks 
> > > 
> > > Brain
> > > 
> > > 		
> > > __________________________________ 
> > > Yahoo! Mail Mobile 
> > > Take Yahoo! Mail with you! Check email on your
> > > mobile phone. 
> > > http://mobile.yahoo.com/learn/mail 
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > >
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new Resources site
http://smallbusiness.yahoo.com/resources/