[cisco-voip] AS5350 Integrated SLT

[Teodor Dobrev]

That is working configuration (the part you need) and that will be with
two PGW (master and slave) with two network interfaces.

-----------------------

 

controller E1 3/0

line-termination 75-ohm

channel-group 15 timeslots 16

pri-group timeslots 1-15,17-31 nfas_d primary nfas_int 0 nfas_group 0 

!

interface Dchannel3/0

no ip address

no snmp trap link-status

isdn incoming-voice modem

no isdn send-status-enquiry

isdn negotiate-bchan resend-setup

isdn sending-complete

no cdp enable

!

ss7 session 0 address 10.90.10.22 7001 10.90.12.22 7001 session-set 0

ss7 session 1 address 10.90.10.23 7001 10.90.12.22 7001 session-set 0

ss7 session 2 address 10.90.10.14 7001 10.90.12.22 7001 session-set 0

ss7 session 3 address 10.90.10.15 7001 10.90.12.22 7001 session-set 0

ss7 mtp2-variant itu 0

SUERM-number-octets 16

 

 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mladen
Milanovic (mmilanovic)
Sent: Thursday, November 03, 2005 11:01 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] AS5350 Integrated SLT

 

Hi Group,

does anyone have working configuration for AS5350 as a integrated SLT. I
would like to make some tests in my lab with PGW2200. On CCO I find only
examples with separate SLT on Cisco2600 series.

 

 

Thanks

Mladen

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051104/509cfc6d/attachment.html