[cisco-voip] Caller ID on 1760 with VWIC using H323

[Wes Sisk]

run a 'debug vpm all' to make sure the callerID is being received at the 
voice port.  the peer analog service may be sending CLID after 2nd or 
3rd ring so you have to configure router differently

configuring different times to receive CLID:
http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1834/products_feature_guide09186a008009cc4b.html

example debugs:
http://www.cisco.com/en/US/customer/tech/tk652/tk653/technologies_configuration_example09186a00800a9a49.shtml

/Wes

Chad Whitten wrote:

>is it possible to pass caller id in to the callmanager for display on
>phones from pots lines connected to a vwic on a cisco router.  im using
>h323 signaling on the router to the callmanager.  the lines have caller id
>enabled from the telco but i just get "unknown" on the phone display. 
>callmanager version is 3.2
>
>  
>