[cisco-voip] RTCP reports

[Cumhur]

Dear Greg,
 
via this command you can modify interval.
 
ip rtcp report interval  ...
 
Please review this document
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122
limit/122x/122xb/122xb_2/ftsiprtp.htm
 
PS: 	Note   The timer receive-rtcp command configures a media activity
timer that is common to both H.323 and SIP. If set, it affects both H.323
and SIP calls.	 
 
CISCO NETWORK ANALYSIS MODULE FOR BRANCH ROUTERS 
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_implementatio
n_design_guide09186a00801eb930.html


Scenario 4: VoIP and QoS Monitoring

The Cisco NAM for Branch Routers is able to recognize IP telephony sessions
in the network by decoding VoIP protocols such as SCCP. With VoIP data
collection turned on, quality of calls can be extracted by decoding the VoIP
control packets. Analysis is available to provide granular details about
each phone session and system. Furthermore, in conjunction with using
DiffServ (QoS), an administrator can verify the QoS classes associated with
the VoIP traffic. In this scenario, some important questions that can be
answered include:
. What is the average jitter rate and packet loss for the phones that are
monitored?

. What is the worst call quality experienced?

. What are the call-session types (SCCP or H.323)?

. What Cisco Real-Time Transport Protocol (RTP) ports are being used in
these calls?

 

Regards,

Cumhur

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of gboda at eircom.ie
Sent: Friday, November 11, 2005 17:31
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] RTCP reports




Hi,  

I could`t find any information about RTCP reports on IOS gateways apart from
the command that sets the reporting interval.

Does anyone know how to: 

- enable/disable RTCP on an IOS H.323 GW? 
- Are there any Cisco Works products that can receive the RTCP messages and
create graphical reports? If not, then which vendor`s RTCP server would you
recommend?

- Is RTCP sent from every Cisco DSP board (NM-HDV, PVDM, AIM) module for
each tdm-to-voip call? 

Thanks. 

Greg 



***************************************************************
The information contained in this e-mail and any files transmitted 
with it is confidential and may be subject to legal professional 
privilege. It is intended solely for the use of the addressee(s). 
If you are not the intended recipient of this e-mail, please note 
that any review, dissemination, disclosure, alteration, printing, 
copying or transmission of this e-mail and/or any file transmitted 
with it, is prohibited and may be unlawful. 
If you have received this e-mail by mistake, please promptly 
inform the sender by reply e-mail and delete the material. 
Whilst this e-mail message has been swept for the presence of 
computer viruses, eircom does not, except as required by law, 
represent, warrant and/or guarantee that the integrity 
of this communication has been maintained nor that 
the communication is free of errors, viruses, interception or 
interference. 
***************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051111/f7c9c5f7/attachment.html