[cisco-voip] AS5400 thinks it is an as5350

[Richard Bennett]

Hi,
I have an as5400, and was having problems getting my np60 and 2E1 boards being 
recognized. It seems that the as5400 thinks it is an as5350, and only 
recognizes boards inserted into the bottom 3 slots.
Is this a setting somewhere, or did the supplier install the wrong IOS?

Thanks for any ideas.
Richard.

sh ver:
Cisco IOS Software, 5350 Software (C5350-JS-M), Version 12.4(1), RELEASE 
SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 29-Apr-05 17:08 by hqluong

ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
BOOTLDR: 5400 Software (C5400-BOOT-M), Version 12.2(2)XB2, EARLY DEPLOYMENT 
RELEASE SOFTWARE (fc1)

net2 uptime is 2 hours, 36 minutes
System returned to ROM by reload at 19:34:11 UTC Sun Nov 13 2005
System restarted at 19:35:00 UTC Sun Nov 13 2005
System image file is "flash:c5400-js-mz.124-1.bin"

Cisco AS5400 (R7K) processor (revision T) with 262144K/131072K bytes of 
memory.
Processor board ID JAE090658WZ
R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from IOS reload
Manufacture Cookie Info:
 EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,
 Board Hardware Version 3.34, Item Number 800-5171-02,
 Board Revision C0, Serial Number JAE090658WZ,
 PLD/ISP Version 2.2,  Manufacture Date 2-Feb-2005.
Processor 0x14, MAC Address 0012.801c.6894
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet interfaces
76 Serial interfaces
60 terminal lines
4 Channelized E1/PRI ports
512K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
16384K bytes of processor board Boot flash (Read/Write)

Configuration register is 0x2102