[cisco-voip] CDR

[Lelio Fulgenzi]

Change the service/enterprise parameter 'zero length CDR' to true and you will get all those calls. It will likely increase you CDR database quite a bit though.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I had a coffee and Coke at lunch today...and now, I've got more jitter than an
IP phone on a long haul 10base2 connection"                                           LFJ
  ----- Original Message ----- 
  From: Voll, Scott 
  To: cisco-voip at puck-nether.net 
  Sent: Thursday, November 17, 2005 11:31 AM
  Subject: [cisco-voip] CDR


  I'm running CM 4.1.3sr1.

  I know I can go into the phone and list the missed calls and received
  calls.  Is there a way to see this information in CDR or some other way
  to pull up that data on a long range bases?

  I believe CDR only gives me the completed calls (including VM).  I'm
  also looking for the people that hang up (missed calls).

  Thanks

  Scott

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051117/1e5604a1/attachment.html