[cisco-voip] Phone software for dialing from Outlook?

[IT]

The issue we have found with TSP is that the user must have their
network login and password stored in the control panel for the TSP.
Since we have a forced monthly password change, this breaks the
functionality of TSP. Is there an alternative?

Thanks,
Avidan

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Friday, November 18, 2005 12:54 PM
To: Tim Reimers
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Phone software for dialing from Outlook?

You want the plain old Cisco TSP.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/ 
products_configuration_example09186a008017902d.shtml

-Ryan

On Nov 18, 2005, at 3:35 PM, Tim Reimers wrote:



Does anyone know what software there is for allowing a user (perhaps  
with Attendant Console loaded) to dial contacts from their Outlook?



I know there's all kinds of ancient 'pick up my modem and dial' and  
then pick up the phone type stuff-





Was wondering what there is that integrates with Outlook for IP phones?



I'd _prefer_ not to license IP Communicator (it's not free, is it?)



I have no idea



Thanks ,Tim

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

******************************************************
This email may contain trade secrets and/or other information that is 
proprietary and/or confidential. Use of this by anyone other than the 
intended recipient(s) is prohibited and may be unlawful. If you are not 
the intended recipient, delete the e-mail and notify us immediately.
******************************************************