[cisco-voip] CCM ringback option and Incoming call indicator

[Voll, Scott]

What version of CM?

 

Both are available.

 

Look up Call Back feature.  You just need to configure and add it to the
softkeys template.

 

I think 3.3 and above allowed the second line to beep in.  I know for
sure in 4.1

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nalaka
Kariyawasam
Sent: Monday, November 21, 2005 12:38 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM ringback option and Incoming call indicator

 

Is it possible to configure following features ( generally available
with PBXes) with CCM :

1. Ringback option: ie when a user dials an extension which is busy , he
can press some key combination and
place the receiver. Sooner the destination extension is free, the
originator get a ring indicating that destination is free.

2. Incoming call indicator: When a user busy with a call and if a second
call comes to the same extension, 
a short beep ( in addition to the LCD indicator display) heard by the
user to indicate that there is another incoming
call.


Regards,
Nalaka Kariyawasam,
IT Specialist/RETAIN Country Coordinator/TCR
IBM Sri Lanka,
Tel +94-11-249-3542

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051121/b572ae17/attachment.html