[cisco-voip] terminology

[Fred Nielsen]

Well.. in general terms DCS is typically another way of referring to a full
or sub rate point to point T1, and sometimes even a full rate single channel
(56/64 kbps) PtP circuit.  Obviously what you are concerned with is the type
of equipment/service Verizon will be plugging the CO end into.

 

I have come across Verizon using the DCS term to refer to CAS voice service.
This was in California, and I understand Verizon West may use slightly
different terminology than in other regions.

 

Fred

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, November 22, 2005 8:18 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] terminology

 

Can someone help me with some terminology.  Verizon can not get me a PRI
circuit in a town I'm looking at putting VoIP in.  But they can get me a
Digital Channel Service.  Is this a CAS t1?

 

TIA

 

Scott

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051122/2e5baa85/attachment.html