[cisco-voip] cisco NM-2CE1B

[Kazmi, Zeeshan]

Perhaps you can find it on:
http://www.cisco.com/warp/public/116/e1_hard_loopback.html

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Engr. Mahboob
Sent: Tuesday, November 22, 2005 7:00 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] cisco NM-2CE1B

Dear Sir/Madam
I am in great problems. My five pcs of cisco NM-2CE1B is returning back
from customer side.
I need to make workable this module with cisco 2621 router. But i can
not do it for exect pinout diagram of cisco E1 cable. I need one side DB
15 Pin male to RJ45.
Can anybody give me pin diagram so taht i can make this cable and make
workable the module.
  
I am here to assist you Sat/Thu 11:30am -9:30pm 

Best Regards
Engr. Mohammed Mahboob
Network Consultant
Daemon lab
Founder & Proprietor
Borland Computers
Member, Academic Committee
Dhaka University Of Engineering & Technology Member, The Institute Of
Engineers, Bangladesh Member, Bangladesh Table Tennis Federation Member,
Jalalabad Samity (Sylhet) Member, Bangladesh Computer Samity (BCS) 52,
New Eskaton Road, TMC Building, 2nd. Floor.
Dhaka - 1000,
Bangladesh
Phone : 8802-9336923, 8802-8313922
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip