[cisco-voip] Help: How to change MGCP Voice Payload Size

[Ciscozest]

HI Mihi,

thanx a lot for your info.

cheers,
----- Original Message ----- 
From: "MIHI" <mihi at ludens.elte.hu>
To: "'Ciscozest'" <ciscozest at gmail.com>; <cisco-voip at puck.nether.net>
Sent: Wednesday, November 23, 2005 3:16 AM
Subject: RE: [cisco-voip] Help: How to change MGCP Voice Payload Size


Hello,

Try the "mgcp codec type packetization-period" command on the router.

Marton

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ciscozest
Sent: Tuesday, November 22, 2005 4:09 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Help: How to change MGCP Voice Payload Size

Hi all,

I have 3745 MGCP gateway with E1 interface and CCM 3.3(4).  I need to enable
VoIP call to another site router running
H.323 with voice payload size of 30bytes. I couldn;t find any parameters in
CCM for this. Anyone can help? thanks 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip