[cisco-voip] is there a way for unity to fwrd call to ext # andspecify the transfered did

[Fred Nielsen]

Are you asking whether Unity can set the outbound CID to be the same as the
subscriber for whose mailbox the notification is being sent for?  This is an
interesting question and I do not know (or think there is a way) for this to
be done.

I think the best you can do is set the CID to be a unique number that
identifies the call as coming from Unity, per Ryan's suggestion below.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Wednesday, November 23, 2005 9:30 AM
To: ajames grace
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] is there a way for unity to fwrd call to ext #
andspecify the transfered did

This is all done by CallManager.  Look at the external number mask on  
your vm ports.

-Ryan

On Nov 21, 2005, at 2:35 PM, ajames grace wrote:

we want to setup the message notification in unity.  but when i  
recieve the message on my cell it say the calling number is our main  
number.  Is the a way for me to conf so that i know what mailboxs is  
notifying me.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip