[cisco-voip] resetting a ATA 186

[Brian Henry]

This is straight from the docs

Resetting the Cisco ATA to Factory Default Values


It is possible that you may, under some circumstances, want to reset the Cisco ATA to its factory default values. For example, this is the only way to recover a forgotten password without contacting your Cisco representative.

To perform a factory reset, you must use the voice configuration menu and follow these steps:


Procedure

________________________________

Step 1   Press the function button on the Cisco ATA.



Step 2   Press the digits 322873738 (FACTRESET) then press # on your telephone keypad.

Step 3   Press 3 on your telephone keypad to confirm that you want to reset the Cisco ATA, then hang up the phone.

This should have worked.

Brian


________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of IT
Sent: Tue 11/29/2005 9:23 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] resetting a ATA 186



Hi,
 I purchased an ata186 second hand, and I do not know the password. I
have tried do the FACTRESET key sequence at the voice prompt, but the
voice just says back to me p-a-s-s-w-d
Is there any other way to reset this device?
Thanks,
avidan

******************************************************
This email may contain trade secrets and/or other information that is
proprietary and/or confidential. Use of this by anyone other than the
intended recipient(s) is prohibited and may be unlawful. If you are not
the intended recipient, delete the e-mail and notify us immediately.
******************************************************


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051129/498a1406/attachment-0001.html