[cisco-voip] CME to CM 4.1 SCCP Call info

[Kevin Thorngren]

Hi Bob,

Yes, that is the expected behavior.  A call between two phones on the 
same CME will have RTP streams directly between the two phones.  If the 
call is to another destination through the CME then the CME is used as 
an MTP device for the call.

Kevin
On Nov 30, 2005, at 12:51 AM, Bob A. Bowie wrote:

> Hello, I have a remote site with CME 3.3 and my Call Manager Cluster 
> 4.1.3 configured as H323 trunk
> through the WAN.  I have a question about call setup, as I am viewing 
> the CME side with a packet analyzer,
> I see the CM IP phone stream to the CME router, and the CME router to 
> the CME IP  Phone.
> QUestion: since these are both sccp phones on a WAN, I thought the 
> media stream should be direct, once
> call setup is completed?  Is what I am seeing correct?
>  
> Tx
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1337 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20051130/82037ad1/attachment-0001.bin