[cisco-voip] CME Call Waiting and Full Consult Transfer

[Zilk, David]

It doesn't look like anyone has responded to you yet.

You have two choices.  Configure two separate ephone-dns on the phone
(i.e. on separate buttons, overlay, etc.)  OR configure an ephone-dn as
a dual-line, and use 'huntstop channel' so that it won't do call
waiting.

The bottom line is that you have to have two 'lines' available on the
phone to do consult transfers.

David

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stathis
Stathopoulos
Sent: Tuesday, September 27, 2005 2:01 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME Call Waiting and Full Consult Transfer

Hi,
  just trying to setup CME phones with
  DNs that support Full Consult Transfer,
  but have Call Waiting Disabled.
  Any ideas how should I do this?

  Regards,

STaTHiS

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.