[cisco-voip] How to transfer directly to vm cme

[Zilk, David]

One way to do it is:

On CME, create a new ephone-dn with a number such as '*...', where the
number of dots matches your extension length.  Set this ephone-dn to
Call Forward All to your voicemail pilot number.

i.e.

ephone-dn  189
 number *...
 description Direct Vmail
 name Direct Vmail
 call-forward all 700


On CUE, add a phonenumberE164 parameter for each user and specify it to
be their extension including the initial '*'.
i.e.

username tsmith phonenumber 100
username tsmith phonenumberE164 *100

A receptionist can then send incoming calls for extension 100 directly
to voicemail by transferring the call to *100.



David


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James
Sent: Thursday, September 29, 2005 8:46 AM
To: CiscosupportUpuck
Subject: [cisco-voip] How to transfer directly to vm cme

We need to configure transfer directly to vm on our cme system .  Not
sure how to do it 
James D. Grace 
System Engineer
CCNP CCNA MCSE MCDBA 
Digitel Corp.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.