[cisco-voip] Tandberg T550 Video endpoints

[Bill Riley III]

Never used the T550 but I have used the 770 and the 880 and they worked
very well. Depending on what you buy you can set them up as a SCCP
endpoint or a H.323 endpoint. If you get the SCCP endpoint you must
install a patch from Tandberg so the device shows up in CCM. Other than
that you configure both as phones and dial each other just like an
extension and when the other end answers the video comes up.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Michael L.
Windon
Sent: Monday, October 03, 2005 8:56 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Tandberg T550 Video endpoints

 

Anyone using the T550 in there CIPT network?

 

Does the video endpoints support Point to Point Video calls like the VT
Advantage without a Tandberg MCU?

 

Do they play well with meeting place?

 

Sincerely,

Michael L. Windon
"It is possible to store the mind with a million facts and still be
entirely uneducated. "
-Alec Bourne

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051004/8cfe13f1/attachment.html