[cisco-voip] SJPhone as H.323 client..

[Tim Reimers]

Just curious---
 
I've got SjPhone set up and running as an H.323 client on my
CallManager---
 
The below worked great---  I only have two issues--
 
1. Cannot make calls off the VOIP network-- ie, can call any IP phone.
Cannot call to a phone on the PSTN via our ISDN PRI...
 
I added a dial-peer to the router-
I can now receive calls from the outside world
 
I cannot make calls going out-- it says 'remote peer did not accept your
call'
 
 
2. What licensing is required for this?
I might roll out a few more of these if it's legit to use these -
 
thanks, Tim
 
Cisco Call Manager Settings. 
Call Manager Administration: 
1. On the Main page, select Add a New Device. 
2. On the Add a New Device page, select Phone for Device Type. Then
click the Next button. 
3. On the Add a New Device page, select H.323 Client for Phone Type.
Then click the Next button. 
4. One the Phone Configuration page, enter the SJphone's IP address for
Device Name. If the SJphone host has multiple addresses, use the address
selected in the Use following host address option on the SJphone's Call
Options tab. Select the necessary Device pool option (required) and
other settings. Then click the Insert button. 
The 'The phone has been inserted in the database. Would you like to add
a directory number for line 1 of this phone now?' message will appear.
Click the Yes button. 
5. On the Directory Number Configuration page, enter a phone number
corresponding to this SJphone. Then click the Insert button. 
The 'Reset the devices to have the changes take effect' message will
appear. Click the OK button. 
The 'Device reset initiated' message will appear. Click the OK button. 
The 'The directory number has been assigned to the current device. Click
OK to return to the current device, or Cancel to stay on the Directory
Number page.' Click OK if you are through with the assigned number, or
Cancel, if you want to add an additional assigned number. 
6. On the Phone Configuration page, click the Reset Phone button. 
7. On the Reset Device pop-up page, click the Reset button to make the
settings for this SJphone take effect. 

SJphone Profile. 
1. Ensure that SJphone is on the Advanced mode 
2. Go to the Profiles tab and click/tap the New button. 
The 'Create New Profile' window will appear. 
3. In Profile, select 'Calls through H.323 Gateway', then enter the
profile name, and change the File name, if necessary. 
4. On the Initialization tab, clear all options. 
5. On the H.323 Gateway tab, enter the Cisco Call Manager's IP address. 
6. Leave all other settings on the other tabs as they are. Then
click/tap OK. 
7. Select this profile to make it active. This profile does not require
initialization.

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051011/fd1aacae/attachment.html