[cisco-voip] RE: Problem with inbound calls to FXO interface

[Kris Seraphine]

The connection plar 6000 won't work unless you have a voip dial-peer
that matches that number, or an ephone registered with that extension. 

 

If you are trying to configure the gateway for SRST, you'll need to add
the following command:

 

application

 global

  service alternate default

 

I don't think that will solve your problem though.  If not, I would
suggest removing the connection plar and dial-peers 10 and 11 (or add
the session mgcp command to them).  There have been problems in the past
with MGCP where the default session dial-peers are matched when they
shouldn't be.  The fact that your calls were being answered with dial
tone makes me think this is the problem. 

 

 

 

Kris Seraphine

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051014/ec5b1eff/attachment.html