[cisco-voip] CMM SPAN

[Philip Walenta]

Why not try ISDN Q931 debug?  Or DSP debugs to see what DTMF the DSP's think
they are seeing? 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, October 20, 2005 5:13 PM
To: erickbe at yahoo.com; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CMM SPAN

DTMF coming in from a PBX running Qsig to the CMM.  Sometimes Unity sees the
DTMF and sometimes Not.

Scott

-----Original Message-----
From: Erick Bergquist [mailto:erickbe at yahoo.com]
Sent: Thursday, October 20, 2005 3:05 PM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CMM SPAN


Can you maybe mirror/span the port that is going to
the call manager server?

What is the issue you are troubleshooting involving
the CMM that needs a trace?

--- "Voll, Scott" <Scott.Voll at wesd.org> wrote:

> Has anyone had to SPAN a CMM on a CAT 6509?
> 
> I need to get some sniffer traces and It gives me an
> error of "used by
> service module"  How should I get the traces off
> this.  The CMM is just
> sending traffic on the same Vlan.
> 
> TIA
> 
> Scott
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



		
__________________________________ 
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip