[cisco-voip] h323 faststart and h245 tunneling

[Cumhur]

Hi Netwirker,

voice service voip 
 h323
   call start fast

Global setting for H.323 Call start procedures: Fast/Slow Start (Default:
Fast Start)
 
and check your configuration using " show call act voi  " 

FastConnect=TRUE

and 

 start  Global setting for H.323 Tunneling : Enabled/ Disabled
(Default:Enabled )
voice service voip 
 h323
  h245 tunnel disable (this command is hidden some IOS versions) 
or  "no  h245 tunnel disable " for enabling

and check your configuration using " show call act voi  " 

H245 Tunneling=TRUE

Regards,
Cumhur 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of netwirker
Sent: Sunday, October 23, 2005 07:55
To: cisco-voip
Subject: [cisco-voip] h323 faststart and h245 tunneling

Hi all,

H323 faststart and h245 tunneling are two features almost needed for all
VoIP service
provider. But how can I configure these two features in Cisco gateway?

Thanks!

netwirker
netwirker at gmail.com
2005-10-23

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip