[cisco-voip] h323 faststart and h245 tunneling

[netwirker]

Thanks,Cumhur!

	
>Hi Netwirker,
>
>voice service voip 
> h323
>   call start fast
>
>Global setting for H.323 Call start procedures: Fast/Slow Start (Default:
>Fast Start)
> 
>and check your configuration using " show call act voi  " 
>
>FastConnect=TRUE
>
>and 
>
> start  Global setting for H.323 Tunneling : Enabled/ Disabled
>(Default:Enabled )
>voice service voip 
> h323
>  h245 tunnel disable (this command is hidden some IOS versions) 
>or  "no  h245 tunnel disable " for enabling
>
>and check your configuration using " show call act voi  " 
>
>H245 Tunneling=TRUE
>
>Regards,
>Cumhur 
>
>-----Original Message-----
>From: cisco-voip-bounces at puck.nether.net
>[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of netwirker
>Sent: Sunday, October 23, 2005 07:55
>To: cisco-voip
>Subject: [cisco-voip] h323 faststart and h245 tunneling
>
>Hi all,
>
>H323 faststart and h245 tunneling are two features almost needed for all
>VoIP service
>provider. But how can I configure these two features in Cisco gateway?
>
>Thanks!
>
>netwirker
>netwirker at gmail.com
>2005-10-23
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip