[cisco-voip] JTAPI - Route Address from Endpoint

[Wes Sisk]

I'm not much of a jtapi programmer, but have done considerable support of CM
call control and JTAPI.

It would depend on the parameters used to redirect the call from the CTI
Route Point to the destination.  A 'normal' redirect will leave the original
called party number (ocdpn) in place and this can be queried as one of the
attributes of the call presented to the destination.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of MJ Bunkowske
Sent: Tuesday, October 25, 2005 8:22 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] JTAPI - Route Address from Endpoint


I know there isn't a lot of JTAPI discussion going on here, but there has
been some in the past so...

Using JTAPI 1.2 with Cisco CallManager 3.3 (and 4.1).

Is there a way for an app monitoring only the destination (endpoint) device
to to get the Address of the device that routed the call (the RouteAddress)?

For example:
A client calls an 800 number connected to a route point. The route point
routes that call to a destination device (the endpoint). I'd like to
retreive the 800 number associated with that route point from events on the
endpoint that's being monitored.

The addresses I can retreive are:
Call.getCalledAddress() - returns the address of the monitored device (the
endpoint).
Call.getCallingAddress() - returns the address of the originator of the call
(the client address).
Call.getLastRedirectedAddress() - returns null
No other methods seem relevant (unless I'm missing something).

Any comments/suggestions are welcome. Thanks.

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip