[cisco-voip] CCM channel-group, pri-group or ds0-group ?

[Philip Walenta]

You should be using pri-group.  It's the only thing that will create a
serial interface for the D channel.  Once the pri-group is created on your
E1 controller, you should see a serial X/x:15 interface.  On that interface
set your isdn switch-type to "primary-dpnss" if I remember correctly. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Steven
Sent: Wednesday, October 26, 2005 5:35 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM channel-group, pri-group or ds0-group ?

I wonder if anyone has experience of configuring CCM with a Siemens iSLX
exchange? I am using a 2820 router with vwic E1 card and a Westell 2000 plus
DPNSS to QSIG gateway. I am unsure as to what config I should use for the
Cisco config. Should I be using a channel group, pri-group or ds0-group? 

Thanks in advance
Steven Jack

Steven Jack
Videoconferencing Manager
University of Glasgow
Computing Service
Glasgow G12 8QQ
UK
Tel +44(0)1413303828 Fax +44(0)1413303820
Email: s.jack at compserv.gla.ac.uk




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip