[cisco-voip] How to configure CCM with SIP

[Teodor Georgiev]

I do not think that it is possible. You can setup a SIP trunk on the CCM,
but you can not
specify an username&password. Your SIP povider should authenticate you
against your
IP address.
If they do not want to do it, you can put Asterisk or SER (SIP Express
Router) in the middle and
do your job :)


----- Original Message -----
From: "Brain Whistler" <brainwhistler at yahoo.com>
To: "Cisco Voip" <cisco-voip at puck.nether.net>
Sent: Wednesday, October 26, 2005 8:41 AM
Subject: [cisco-voip] How to configure CCM with SIP


> Hi,
>
> Does anyone know how to configure CCM 4.0.1 with SIP
> to call through Service Provider. Remember that my
> service provider requires userid and password to be
> sent with the call for authentication.
>
> Thanks
> BW
>
>
>
>
> __________________________________
> Yahoo! Mail - PC Magazine Editors' Choice 2005
> http://mail.yahoo.com
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip